Category: IEC
IEC
Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 1: General requirements
standard by International Electrotechnical Commission, 02/13/2001
Delay and power calculation standards – Part 3: Standard Delay Format (SDF) for the electronic design process
standard by International Electrotechnical Commission, 09/24/2004
Materials for printed boards and other interconnecting structures – Part 2-32: Reinforced base materials, clad and unclad – Halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined relative permittivity (equal to or less than 3,7 at 1 GHz) and flammability (vertical
standard by International Electrotechnical Commission, 02/11/2009
Electrical installations of ships and mobile and fixed offshore units – Part 1: Procedures for calculating short-circuit currents in three-phase a.c.
standard by International Electrotechnical Commission, 02/26/1998
Electric appliances connected to the water mains – Avoidance ofbacksiphonage and failure of hose-sets CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 10/13/2015
Electronic railway equipment – Train communication network (TCN) – Part 3-3: CANopen Consist Network (CCN)
standard by International Electrotechnical Commission, 06/21/2012
Methods of measurement on receiving antennas for satellite broadcast transmissions in the 11/12 GHz band – Part 2: Mechanical and environmental tests on individual and collective receiving antennas
standard by International Electrotechnical Commission, 02/14/1996
Connectors for electronic equipment – Part 4-115: Printed board connectors – Backplane connector for InfiniBand equipment
standard by International Electrotechnical Commission, 02/26/2003
Industrial process control systems – Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly
standard by International Electrotechnical Commission, 06/27/2013
Printed boards – Electronic data description and transfer – Part 7: Bare board electrical test information in digital form
standard by International Electrotechnical Commission, 09/22/1995