Category: IEC

IEC

IEC 60642-2 Ed. 1.0 b:1994

IEC 60642-2 Ed. 1.0 b:1994

Piezoelectric ceramic resonator units – Part 2: Guide to the use of piezoelectric ceramic resonator units
standard by International Electrotechnical Commission, 02/08/1994

IEC 60335-2-99 Ed. 1.1 en:2017

IEC 60335-2-99 Ed. 1.1 en:2017

Household and similar electrical appliances – Safety – Part 2-99: Particular requirements for commercial electric hoods CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 06/19/2017

IEC 60938-2 Ed. 2.0 b:1999

IEC 60938-2 Ed. 2.0 b:1999

Fixed inductors for electromagnetic interference suppression – Part 2: Sectional specification
standard by International Electrotechnical Commission, 11/04/1999

IEC 60747-16-4 Ed. 1.0 b:2004

IEC 60747-16-4 Ed. 1.0 b:2004

Semiconductor devices – Part 16-4: Microwave integrated circuits – Switches
standard by International Electrotechnical Commission, 07/28/2004

IEC 60728-113 Ed. 1.0 en:2018

IEC 60728-113 Ed. 1.0 en:2018

Cable networks for television signals, sound signals and interactive services – Part 113: Optical systems for broadcast signal transmissions loaded with digital channels only
standard by International Electrotechnical Commission, 07/10/2018

IEC 60794-3-40 Ed. 1.0 en:2008

IEC 60794-3-40 Ed. 1.0 en:2008

Optical fibre cables – Part 3-40: Outdoor cables – Family specification for sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers
standard by International Electrotechnical Commission, 10/08/2008

IEC 60601-2-16 Ed. 4.0 b:2012

IEC 60601-2-16 Ed. 4.0 b:2012

Medical electrical equipment – Part 2-16: Particular requirements for basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment
standard by International Electrotechnical Commission, 03/08/2012

IEC 60487-2-2 Ed. 1.0 b:1981

IEC 60487-2-2 Ed. 1.0 b:1981

Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2: Measurements for sub-systems. Section Two: Stand-by channel switching equipment
standard by International Electrotechnical Commission, 01/01/1981

IEC 60146-1-1 Ed. 4.0 b:2009

IEC 60146-1-1 Ed. 4.0 b:2009

Semiconductor converters – General requirements and line commutated converters – Part 1-1: Specification of basic requirements
standard by International Electrotechnical Commission, 06/29/2009

IEC 60947-7-1 Ed. 3.0 b:2009

IEC 60947-7-1 Ed. 3.0 b:2009

Low-voltage switchgear and controlgear – Part 7-1: Ancillary equipment – Terminal blocks for copper conductors
standard by International Electrotechnical Commission, 04/20/2009